SARNAMATIC Tech Tips

SARNAMATIC 661

• Error 6 
  Occurs if the nozzle is in the welding position at power-up
  Also occurs if the power to the SARNAMATIC cuts out and comes back on while the tool is in use. Power will drop if there is a poor connection in the cord or plug, and due to overload or contaminated fuel when using a generator.

SARNAMATIC 641MC 

• An error is displayed while the tool is cooling down 
  Answer: This is not a problem. Errors that come up while the SARNAMATIC is cooling down can be ignored.
• Error 7 
  Occurs if the nozzle is in the welding position at power-up
  Also occurs if the power to the SARNAMATIC cuts out and comes back on while the tool is in use. Power will drop if there is a poor connection in the cord or plug, and due to overload or contaminated fuel when using a generator. 
• Error 8
  Occurs if the heat is not turned off at power-up
  Also occurs if the power to the SARNAMATIC cuts out and comes back on while the tool is in use. Power will drop if there is a poor connection in the cord or plug, and due to overload or contaminated fuel when using a generator.