Leister Canada
  • Home
  • Equipment
    • All Equipment >
      • Air Heaters
      • Automatic Equipment
      • Blowers
      • Extrusion Welders
      • Hot Air Blowers
      • Hot Air Hand Tools
      • Testing Equipment
    • Flooring
    • Geomembrane
    • Industrial Fabrics
    • Manufacturing
    • Plastic Fabrication
    • Roofing & Decking
  • Services
    • Product Selection Help
    • Engineering Help
    • Installation Support
    • Product Training
    • Product Service
  • Resources
    • Articles
    • Case Studies
    • Engineering Information
    • Operating Manuals
    • Tech Tips
    • Whitepapers
  • About Us
  • Contact
    • Contact Us
    • Find a Distributor
  • Français

TRIAC AT Hot Air Hand Tool

TRIAC AT
The TRIAC AT offers the advantages of closed-loop temperature control, independent air flow control, and a digital display. Leister’s unique »e-Drive« control system makes it easy to use and includes a lock feature to prevent accidental setting changes while the tool is in use.
  • Digital display shows precise value of temperature and level of air flow selected; warnings such as undervoltage, replace carbon brushes soon, and tool overheated included on display
  • Cool down mode with automatic shut-off
  • Independent temperature and air flow control
  • Automatic and constant temperature adjustment independent of voltage fluctuations and environmental conditions
  • Easy and comfortable to use
  • Automatic shut-off when carbon brushes are worn to prevent expensive damages
  • Additional heater tube sleeve helps prevent burns during use
  • Electronic protection of heating element
  • Construction site tested and suitable for outdoor use

Why Buy From Us

The TRIAC AT, available in Canada only through STANMECH and its distributor network. ​Tools bought through us are electrically certified for use in Canada. In many cases this entails replacing cords or switches in the tool to meet stringent CSA standards. Each tool is physically inspected by an approved field inspector prior to certification. We service everything we sell from our facility in Burlington, Ontario, Canada.

Technical Data

Voltage

V

120

230

Frequency

Hz

50 / 60

50 / 60

Power Consumption

kW

1.6

1.6

Temperature

°C

40 - 650

40 - 650

Air flow

l/min

120 - 240

120 - 240

Noise level

dB

67

67

Size (L x W)

mm

335 x 90, handle Ø 56

335 x 90, handle Ø 56

Weight

kg

1.0

1.0

Approval markings

 

CE, C-UL-US

CE, QPS

Electrical protection

 

Class II

Class II

Part Numbers

141.382: TRIAC AT - 120 V / 1600 W
141.314: TRIAC AT - 230 V / 1600 W
Download operating manual

Accessories

107.123: Wide slot nozzle 20 mm, push-fit
Wide slot nozzle 20 mm, angled, push-fit
107.124: 90° bend
107.125: 60° bend
105.492: Wide slot nozzle 20 mm, straight jaw, 120°, bent at right angle
Wide slot nozzle, push-fit
107.132: 40 mm
107.130: 40 mm, 60° angled
107.133: 40 mm, perforated
128.535: 30 mm, 45° angled
Wide slot nozzle, push-fit
107.129: 60 mm
107.131: 80 mm
100.303: Tubular nozzle Ø 5 mm, push-fit
106.996: Tacking nozzle, push-fit on tubular nozzle
Speed welding nozzle, push-fit on tubular nozzle
106.989: 3 mm, round
106.990: 4 mm, round
106.991: 5 mm, round
Speed welding nozzle, curved, push-fit on tubular nozzle
156.470: 5 mm, round
Speed welding nozzle with small air-slide, push-fit on tubular nozzle
105.431: 3 mm, round
105.432: 4 mm, round
105.433: 5 mm, round
Speed welding nozzle with small air-slide, curved, push-fit on tubular nozzle
160.550: 3 mm, round
159.848: 5 mm, round
Speed welding nozzle, push-fit on tubular nozzle
106.992: 5.7 mm, triangular "profile A"
106.993: 7 mm, triangular "profile B"
107.137: Speed welding nozzle for tape 8 mm, push-fit on tubular nozzle
107.139: Speed welding nozzle 4.5 x 12mm for fillet seams, push-fit on tubular nozzle
165.937: Gooseneck smoothing nozzle, push-fit on tubular nozzle
153.009: PLASTFIX Corner press tool
152.676: Welding gauge
107.344: Welding mirror 135 mm, push-fit
Spoon reflector, push-fit
107.307: 27 x 35mm
107.339: 17 x 34 mm
107.326: Shell reflector 25 x 150 mm, push-fit
Sieve reflector, push-fit
107.337: 50 x 35 mm
107.338: 35 x 20 mm
107.324: 12 x 10 mm, push-fit on tubular nozzle Ø 5mm
Pressure roller
106.974: Silicone, 80 mm
140.160: Silicone, 40 mm
140.161: Silicone, 28 mm
106.976: PTFE, 28 mm
106.972: Pressure roller with ball bearings, brass
138.314: Seam probe tester for roofing
111.346: Edge plane with 10 spare blades
111.348: 10 spare blades for edge plane
151.188: Chamfer plane for T-joints
151.382: KEHLFIX Inside corner press tool
106.966: Hand grooving tool for flooring
106.968: Replacement blades for hand grooving tool
106.969: Spatula for floor weld trimming
122.541: Trimming guide, for use with spatula
117.000: "Mozart" Trimming Knife (5 spare blades included)
117.005: 5 spare blades
117.007: Replacement universal spacer
137.855: Leister knife with four blades
138.902: 10 spare blades, hook shape
138.539: 10 spare blades, trapezoid shape
107.348: Tool rest
116.586: Storage case
142.718: Element for TRIAC AT 120V 1550W
142.717: Element for TRIAC AT 230V 1550W
PLEASE NOTE: Both our inbound shipping companies and our outbound couriers are currently advising all customers to expect delays with their parcel deliveries due to drastically increased volumes and the introduction of additional safety measures for their employees. These delays are completely out of our control and we appreciate your patience if they affect delivery of your package
STANMECH Technologies Inc. 
944 Zelco Drive Burlington ON L7L 4Y3 | 1-888-438-6324 | 
info@stanmech.com
Terms of Use    Privacy    Terms and Conditions of Sale
Français

Proud Member of:
Picture
Industrial Fabrics Association International
Picture
International Association of Geosynthetic Installers
Picture
​Authorized by the Association of Professional Engineers of Ontario to offer professional engineering services. 
  • Home
  • Equipment
    • All Equipment >
      • Air Heaters
      • Automatic Equipment
      • Blowers
      • Extrusion Welders
      • Hot Air Blowers
      • Hot Air Hand Tools
      • Testing Equipment
    • Flooring
    • Geomembrane
    • Industrial Fabrics
    • Manufacturing
    • Plastic Fabrication
    • Roofing & Decking
  • Services
    • Product Selection Help
    • Engineering Help
    • Installation Support
    • Product Training
    • Product Service
  • Resources
    • Articles
    • Case Studies
    • Engineering Information
    • Operating Manuals
    • Tech Tips
    • Whitepapers
  • About Us
  • Contact
    • Contact Us
    • Find a Distributor
  • Français